Why not DESIGN and CREATE your own DIY Shelf-set?
Initially you buy the base plate 600mm (L) with the 1 x (190x200x30mm) with a floating shelf included.
Option 1: You can mount the set as is or you can buy 1 or 2 additional (190x200x30mm) floating shelves to make up a full set.
OR
Option 2: You can keep adding to the top/bottom by buying a 300mm (L) extension piece and keep adding (190x200x30mm) floating shelves to extend the set according to your own design.
Features and Benefits:
- Functional and versatile
- Manufactured from 100% kiln-dried SA pine
- Lacquered and treated for protection and durability
- Designed to allow extension pieces on top or bottom
Safety:
Max weight – 10kg (per 190mm shelf)
Enclosed with initial product:
- 1x Wall plate
- 1x 190 shelf
- 2x Nail-in anchors (4 x 35mm)
- 2x Key slot holders secured and beveled into the wall plate.
- 12x wood chip screws (4 x 30mm) – for add-on of 190mm floating shelves
- Drilling Guide
MOUNTING INSTRUCTIONS:
Instructions for the wall plate:
- Decide where you want to mount the wall plate, taking into account whether you have purchased add-on extensions for the top and/or bottom.
- Measure out the 2 holes on the top / flip side of the wall plate and/or extension piece.
- When drilling the holes, angle the drill 1-2 degrees upward i.e. drill slightly down into the brick. When mounting the plate, their natural weight will compensate and result in a perfectly flush wall plate
- Insert the wall plug(s) into the holes drilled & then hammer in the nail-in anchors by placing a screwdriver into the nail-in anchor & then gently tapping the end of the screwdriver with your hammer.
- To test positioning, place the key slot holders over the nail-in anchors to see if it all lines up correctly. If it is correct, remove the shelf and hammer in the nail-in anchors.
Instructions for the wall plate extension/s:
- You may now mount the wall plate and you are ready to add 1, 2 or 3 190mm floating shelves.
- You can extend the plate by purchasing additional 300mm long extensions separately or might even opt to purchase additional 190mm Castle Floating Shelves.
- Extensions can be positioned above and/or below the wall plate.
Instructions on how best to use the 190mm Floating Shelf Drilling Guide:
- Position the enclosed Drilling Guide (DG) where you wish to mount the shelf. Once done, use a piece of tape or adhesive to secure the "DG" onto the wall plate.
- Use a spirit level to make sure that the "DG" is straight/level.
- Drill holes into the wall plate as indicated on the "DG".
- When drilling the 4 "DG" holes into the wall plate, angle the drill 1-2 degrees upward i.e. drill slightly down into the wall plate – this will allow for the natural weight of the unit to lie flush with the wall plate.
- Insert the 4 x 30mm wood chip screws through the T-bracket plate into the pre-drilled holes.
- Once secure, slide the floating shelf onto the 2 pins.